Table of Contents
Advertisement
Front Turn Signal
The front turn signal bulbs can be accessed from under
the front of the vehicle. Reach up from under the vehicle
and, while pushing in the tab on the bulb assembly, turn
assembly counterclockwise and remove. Remove the old
bulb by pulling it straight out of the retainer. Replace the
bulb and turn the bulb assembly back into place.
Trunk Mounted Back-up and Taillamps
Cornering Lamps
Follow the same procedure as used for replacing the
headlamps. However, to remove the cornering lamp
bulb, turn the bulb assembly counterclockwise and pull
the bulb straight out.
1. Loosen and remove the eight fasteners (four per
side) that hold the assembly in place. The assembly
for both sides is one piece. The entire piece must be
removed to replace any bulbs.
6-32
Advertisement
Table of Contents
