Advertisement
Passing Another Vehicle While Using Cruise Control
Use the accelerator pedal to increase your speed. When
you take your foot off the pedal, your vehicle will slow
down to the cruise control speed you set earlier.
Using Cruise Control on Hills
How well your cruise control will work on hills depends
upon your speed, load and the steepness of the hills.
When going up steep hills, you may have to step on the
accelerator pedal to maintain your speed. When going
downhill, you may have to brake or shift to a lower gear
to keep your speed down. Of course, applying the brake
takes you out of cruise control. Many drivers find this to
be too much trouble and don't use cruise control on
steep hills.
Ending Cruise Control
There are two ways
to
turn off the cruise control:
Step lightly on the brake pedal; or
Move the cruise switch to OFF.
Erasing Cruise Speed Memory
When you turn off the cruise control or the ignition,
your cruise control set speed memory is erased.
Lamps
. .
li
LtOWtS
0
Headlamps
0
Parking Lamps
0
Sidemarker Lamps
Taillamps
0
License Plate Lamps
0
Instrument Panel Lights
To turn on the headlamps, press the switch with the
lamp symbol.
Press the switch marked P to turn on the parking lamps.
Press OFF to turn off all lamps.
2-33
Advertisement
