Visual Inspection - ACR Electronics SR-102 GMDSS SURVIVAL RADIO 166 Product Support Manual

j. If a response is not heard (full quieting), have the radio unit inspected at your nearest
authorized service center.
k. Press the CHAN 6 key to tune unit to channel 6.
l. Set the monitoring transceiver to channel 6 (156.3 MHz).
m. Listen for any activity on the frequency (channel 6).
n. If no activity is detected, transmit the test message and have someone monitor the
transmission (see above for suggested test message formats).
o. If the test signal was not heard (full quieting), have the unit inspected at your nearest
authorized service center.
p. Have someone return the call from the monitoring station (lowest power setting) to
verify proper radiotelephone receiver operation.
q. If a response is not heard (full quieting), have the radio unit inspected at your nearest
authorized service center.
r. Slide ON/OFF button to turn unit OFF.
s. Replace control panel protective cover.
t. Replace unit into its survival craft package.
5.3

VISUAL INSPECTION

5.3.1 Periodically inspect the Survival Radio for damage, cracks and front panel label wear.
Wipe off any salt deposits with a damp cloth.
7
Y1-03-0079-1 Rev. B