ACR Electronics AIS LINK2AIS - REV D Manual page 21

Serial - Connect to the Nauticast™-B AIS via a serial RS232 connection
o
Port name: COMx (select from the drop down list)
o
Baud rate: 38400
o
Flow control: default is off
TCP/IP - Connect to the Nauticast™-B AIS via TCP/IP
o
IP-Address: address of the Nauticast™-B AIS; e.g. 10.10.10.100
o
Port: port number of the Nauticast™-B AIS; e.g. 10001
Demo Mode - This pseudo-connection enables the Demo Mode
When a connection is established, you will see a green icon, similar to an LED, in the bottom left corner of the main
window and the message "Connected". If a connection cannot be made, a warning message will appear:
The icon will remain red and the message will read "Disconnected".
Program Settings
This dialog lets you change the default program settings as follows:
Units of measure (nautical miles and knots or kilometers and kilometers per hour)
Whether or not an alarm sounds when an alarm or a text message is received by the program
The colors in the GPS views
The color of a selected target
The settings will be stored on your PC.
4. Window
This menu item contains functions to select and arrange the windows in the main window.
Arrange All
Arranges the windows so that all title bars can be read and all windows can be selected with the pointing device.
Y1-03-0223 Rev. D
21