VMware CLOUD DIRECTOR 1.0 Configuration Manual page 13

Virtual Switch Isolation
Supported Browsers
TheCloud Director Web Console is compatible with many versions of the Firefox and Internet Explorer Web
browsers.
"YES" means the browser version and OS platform are compatible, "No" means they are not compatible.
N The Cloud Director Web Console is compatible only with 32-bit browsers. Where a browser is listed as
OTE
supported on a 64-bit platform, use of the 32-bit browser on the 64-bit platform is implied.
Browsers Supported on Microsoft Windows Platforms
Table 1-10 summarizes browser support on Microsoft Windows Platforms.
VMware, Inc.
Chapter 1 Overview of VMware Cloud Director Installation and Configuration
Table 1-8. Ports That Must Allow Incoming Packets From Cloud Director
Hosts (Continued)
Port
61611
61616
Table 1-9 lists the ports used for outgoing connections. Do not connect
these ports to the public network.
Table 1-9. Ports That Must Allow Outgoing Packets From Cloud Director
Hosts
Port
25
53
111
123
389
443
514
902
903
920
1521
61611
61616
Do not connect physical hosts to physical networks that are uplinks for
n
vNetwork distributed switches that back Cloud Director network pools.
Traffic between Cloud Director hosts and the Cloud Director database
n
server should be routed over a dedicated private network if possible.
Virtual switches and distributed virtual switches that support provider
networks must be isolated from each other. They cannot share the same level
2 physical network segment.
Protocol Comments
TCP ActiveMQ
TCP ActiveMQ
Protocol Comments
TCP, UDP SMTP
TCP, UDP DNS
TCP, UDP NFS portmapper used by
transfer service
TCP, UDP NTP
TCP, UDP LDAP
TCP vCenter and ESX connections
UDP Optional. Enables syslog use
TCP vCenter and ESX connections
TCP vCenter and ESX connections
TCP, UDP NFS rpc.statd used by transfer
service
TCP Default Oracle database port
TCP ActiveMQ
TCP ActiveMQ
13