MINOURA RS-4000 TOOL TRAY Manual

HOW TO INSTALL
1. Put the tray onto the top of the main pillar.
2. Point the tip of the knob bolt to the horrow
behind the pillar, then tighten it.
HOW TO INSTALL
1. Put the tray onto the top of the main pillar.
2. Point the tip of the knob bolt to the horrow
behind the pillar, then tighten it.
RS-4000 / TOOL TRAY
Six separate parts holders keeps parts where you want
them.
Tool Tray includes a handy built in beverage or lubri-
cant can holder.
MINOURA CO.,LTD. MADE IN JAPAN
RS-4000 / TOOL TRAY
Six separate parts holders keeps parts where you want
them.
Tool Tray includes a handy built in beverage or lubri-
cant can holder.
MINOURA CO.,LTD. MADE IN JAPAN