Summary of Contents for MINOURA POWERMATIC - REPLACE BELT
Page 1
How To Replace V-Belt – RDA80 & PowerMatic Flip over the Mag unit. Remove the Mag unit from the frame and place on a table. Remove the bolt and oval washer from both upper and Remove 3 screws from the outer edge and 2 screws bottom sides.
Page 2
Assemble the Mag unit. Flip over the Mag unit again. Hook the belt to the pulley. Remove the Top Cover. Now the Main Arm can be removed to replace the Turn the pulley to fit the belt. V-Belt. To adjust the belt tension properly, put a screwdriver between the metal Joint Pin and the Main Arm, then cam out to widen the clearance.