Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Cissell Manuals
  4. Recording Equipment
  5. MAN383
  6. Owner's manual

Cissell MAN383 Owner's Manual

Electronic conveyor control
Hide thumbs

Advertisement

Quick Links

Download this manual
Electronic
Electronic
Electronic
Electronic
Electronic
Conveyor
Conveyor
Conveyor
Conveyor
Conveyor
Control
Control
Control
Control
Control
OWNER'S MANUAL
OWNER'S MANUAL
OWNER'S MANUAL
OWNER'S MANUAL
OWNER'S MANUAL
C I S S E L L
C I S S E L L
C I S S E L L
C I S S E L L
C I S S E L L
M A N U F A C T U R I N G
M A N U F A C T U R I N G
M A N U F A C T U R I N G
M A N U F A C T U R I N G
M A N U F A C T U R I N G
H E A D Q U A R T E R S
H E A D Q U A R T E R S
H E A D Q U A R T E R S
H E A D Q U A R T E R S
H E A D Q U A R T E R S
8 3 1
S O U T H
F I R S T
P . O .
B O X
3 2 2 7 0
L O U I S V I L L E ,
K Y
THIS MANUAL MUST BE GIVEN TO THE EQUIPMENT OWNER.
THIS MANUAL MUST BE GIVEN TO THE EQUIPMENT OWNER.
THIS MANUAL MUST BE GIVEN TO THE EQUIPMENT OWNER.
THIS MANUAL MUST BE GIVEN TO THE EQUIPMENT OWNER.
THIS MANUAL MUST BE GIVEN TO THE EQUIPMENT OWNER.
MAN 383 11/98 2C
MAN 383 11/98 2C
MAN 383 11/98 2C
MAN 383 11/98 2C
MAN 383 11/98 2C
C O M P A N Y
C O M P A N Y
C O M P A N Y
C O M P A N Y
C O M P A N Y
S T .
4 0 2 3 2 - 2 2 7 0
Page 1
Page 1
Page 1
Page 1
Page 1
P H O N E :
( 5 0 2 )
5 8 7 - 1 2 9 2
S A L E S
F A X :
( 5 0 2 )
S E R V I C E / P A R T S
F A X :
5 8 5 - 3 6 2 5
( 5 0 2 )
6 8 1 - 1 2 7 5

Advertisement

loading
Need help?

Need help?

Do you have a question about the MAN383 and is the answer not in the manual?

Questions and answers

Summary of Contents for Cissell MAN383

  • Page 1 Electronic Electronic Electronic Electronic Electronic Conveyor Conveyor Conveyor Conveyor Conveyor Control Control Control Control Control OWNER’S MANUAL OWNER’S MANUAL OWNER’S MANUAL OWNER’S MANUAL OWNER’S MANUAL C I S S E L L C I S S E L L C I S S E L L C I S S E L L C I S S E L L M A N U F A C T U R I N G...

  • Page 2: Warranty

    Cissell's factory, transportation prepaid, within the applicable warranty period and found by Cissell to have been defective, and in no event shall Cissell be liable for damages of any kind, whether for any injury to persons or property or for any special or consequential damages.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS Page Warranty ..........1 S a f e t y P r e c a u t i o n s , S p e c i f i c a t i o n s ......... 3 D e s c r i p t i o n o f F e a t u r e s ........

  • Page 4: S A F E T Y P R E C A U T I O N S , S P E C I F I C A T I O N S

    FOR YOUR SAFETY FOR YOUR SAFETY FOR YOUR SAFETY FOR YOUR SAFETY FOR YOUR SAFETY Always shut off or disconnect power to the conveyor before servicing. Be careful of any loose article of clothing or jewelry that might become entangled in the conveyor links, trolleys, or drive mechanism. Be careful of any body part (hair, finger, etc.) that may get caught in any moving component on the conveyor.
  • Page 5 DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION This control operates one garment conveyor. It allows the attendant to automatically bring any position on the conveyor to the unloading area by entering the position number into the control’s memory and initiating the search operation. Features: •Memory can hold up to six positions at one time •Dual display shows CURRENT POSITION and DESIRED...

  • Page 6: Description Of Control Panel

    DESCRIPTION OF CONTROL PANEL DESCRIPTION OF CONTROL PANEL DESCRIPTION OF CONTROL PANEL DESCRIPTION OF CONTROL PANEL DESCRIPTION OF CONTROL PANEL ON/POWER. Turns power on. Resets the control after an emergency stop. EMERGENCY STOP. Turns power off to control box. Stops conveyor. CURRENT POSITION DISPLAY.

  • Page 7: Installation

    INSTALLATION INSTALLATION INSTALLATION INSTALLATION INSTALLATION Locate the Conveyor control. Route the connection cable (C2102, supplied with control) between the Conveyor control and the electrical box near the drive on the conveyor. The end with the large connector mounts to the con- veyor control.

  • Page 8: Setting Up Conveyor Parameters

    100 (see note) Conveyor positions per revolution 60 (see note) NOTE: The values of 100 and 60 are for Cissell conveyors. If this control is used on another conveyor, these values might be different. Inside of the control box on the rear of the control board are two jumpers (see drawing).
  • Page 9 NOTE: With power removed, the parameters will be retained for approximately 100 hours. Should the power be off for a longer period of time, the parameters will have to be re-entered. CURRENT POSITION To “calibrate” the conveyor control to set the current con- veyor position at the uploading point, key in the current position and press SHIFT + SET.

  • Page 10: Operating Instructions

    OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Before operating the conveyor, the conveyor parameters must be entered into the control and the “current position” set. See “SETTING UP THE CONVEYOR PARAMETERS” on page 7. To automatically seek positions on the conveyor, enter the desired posi- tion on the keyboard (it will show on the upper display).
  • Page 11 Ref. No. Ref. No. Ref. No. Part No. Part No. Part No. Description Description Description Ref. No. Ref. No. Part No. Part No. Description Description C2101 Electronic Control Box C2129 Replacement Fuse C2102 Cable Assembly C2126 Switch Assembly C2103 Optical Encoder Page 11 Page 11 Page 11...
  • Page 12 Ref. No. Ref. No. Part No. Part No. Description Description Ref. No. Ref. No. Ref. No. Part No. Part No. Part No. Description Description Description C2118 Drive Shaft C2114 Adapter Shaft C2104 Encoder Housing C2109 Clamp Plate TU7733 Self Drill Screw C2115 Flange Bearing C2116...
  • Page 13 Page 13 Page 13 Page 13 Page 13 Page 13...