Table of Contents
Advertisement
80 VIDEO EDITOR
To trim a video file into multiple clips:
1. Import your video file into the Production Library. Select the video file, then
click Multi-trim Video
2. In the Multi-trim Video dialog box, view the whole clip first by clicking
determine how you want to mark segments.
3. Drag the Jog Slider until you get to the part of the video that you want to use
as the beginning frame of the first segment. Click Start
4. Drag the Jog Slider again, this time, to the point where you want the segment
to end. Click End
5. Do steps 3 and 4 repeatedly until you have marked all the segments you want
kept or removed.
• To mark segments, you can also press [F3] and [F4] while playing the
video.
• Click Invert Selection
you want to retain or marking segments that you want taken out from the
clip.
6. Click OK when finished. The video segments that you kept are then inserted
onto the Timeline.
Navigation controls in the Multi-trim Video dialog box:
[F5] [F6]
.
.
Reverses or advances through the video in fixed increments. By default,
these buttons move up or down through the video in increments of 25
seconds.
Plays a preview of the final trimmed video.
Plays the video file. Hold [Shift] then click to play only the selected
segments.
Moves to the start or end frame of a trimmed segment.
Moves to the previous/next frame in the video.
to toggle between marking segments that
to
.
Advertisement
Table of Contents
