Add Video Files - Ulead DVD MOVIEFACTORY 6 PLUS User Manual

18 ULEAD DVD MOVIEFACTORY USER GUIDE
Set Auto Capture to DVD
Ulead DVD MovieFactory allows you to set delayed recording times when capturing
from different sources to DVD. You can specify the capture source, the time to start
recording and the total recording duration.
To use Set Auto Capture to DVD:
1. Set the Capture Mode to Set Auto Capture. Then choose your recording
source.
2. Set the start time and capture duration of the recording session.
• The maximum total duration of recording depends on your available disc
space.
• If the start time is earlier than the current time, DVD MovieFactory will start
to record the day after.
3. Click Start Auto Capture to start the task. If you need to reset the start time
and duration, click Stop Capture and reset the values before restarting the
task.

Add video files

DVD MovieFactory allows you to add video files of different formats such as AVI,
MPEG, and WMV into your video project. You can also add a VideoStudio project
(.VSP). You can also directly add MTS and M2TS files to your project.
To add a video file to your project:
1. Click Add video files
to launch the Open Video File dialog box.
2. Locate the video file(s). You can select and add multiple files under the same
folder. Press [Ctrl] or [Shift] to select multiple files.
3. Repeat the above process to add more video files.
in the Select source and import (Step: 1/3) page