Straight To Disc - Ulead DVD DISCRECORDER 2.2 User Manual

Straight to Disc

DVD DiscRecorder provides a fast way to capture videos and then burn them
directly onto a disc in the DVD-VR file format. When this task is selected, DVD
DiscRecorder will initially check both your burner and disc to ensure that there are
no problems with your output device and media.
To capture videos directly onto a disc:
Make sure your video source is switched on and properly connected to your
computer.
1. Insert a disc into the burner. Then click Straight to Disc and click Next.
2. Select the device to capture from Source.
3. Select a capture mode (for example, select fixed duration, marked duration, or
full DV tape if capturing from DV camcorder) and TV channel (if capturing from a
TV tuner). Click Show/Hide Options Panel
needed.
4. Select the capture format.
5. Click Burning Options to set the volume name and disc burner to use.
6. Locate the starting point of your video to capture, and click Start capture. Click
Pause capture to pause the capturing process. Click Stop capture to end the
capturing process.
ULEAD DVD DISCRECORDER USER GUIDE 15
to view additional settings as