Configuring Audio Playback Ports - Toshiba PA3838U-1PRP User Manual

When your computer is docked in the port replicator, SPDIF and Line
in ports may display in Windows
These ports should appear as "Currently unavailable" and are
actually not supported by the port replicator.

Configuring audio playback ports

1 Right-click the speaker icon in the notification area of your
Windows
(Sample Image) Windows
If the speaker icon is not visible in the notification area, access the
audio configuration utility through the Start menu as follows:
Click Start, Control Panel, Hardware and Sound, and then Sound.
2 Select Playback Devices from the menu.
3 On the Playback tab of the dialog box, select one of the
following:
❖ A Realtek High Definition Audio device—to use the
❖ A USB Multimedia Audio device—to use the port
❖ An Intel
4 Click Set Default.
5 Click OK.
6 Connect your playback device to the port you enabled in step 3.
®
desktop.
®
docked computer's Headphone/Line out jack
replicator's Headphone/Line out jack
®
audio device—to use the corresponding HDMI
device you connected
Configuring audio ports
®
audio properties dialog boxes.
speaker icon
19