To install the device driver on the Windows XP, Windows Vista, or Windows 7 operating system, do the
following:
1. Save any open documents and exit all applications.
2. Insert the Software and User Guide CD and do one of the following:
v If the CD starts automatically, go to step 3.
v If the AutoPlay window opens, click Run start.bat. Then, go to step 3.
v If the CD does not start automatically, go into My Computer or Computer, browse the CD/DVD
drive, and double-click Start.bat.
3. At the prompt of the Internet Explorer
content.
4. Select your language.
5. On the left side of the window, click Software.
6. Follow the instructions on the screen.
7. Restart your computer after the completion message. The system will automatically identify and
configure the port replicator. The video output function of the port replicator will be automatically
enabled after the configuration is completed.
Uninstalling the device driver from Windows operating systems
This section provides instructions for uninstalling the device driver from the Windows XP, Windows
Vista, or Windows 7 operating system.
To uninstall the device driver, do the following:
1. Exit all applications that use the port replicator.
2. Click Start → Programs or All Programs → Lenovo USB Port Replicator with Digital Video →
Uninstall Lenovo USB Port Replicator with Digital Video.
3. Click Next and follow the instructions on the computer screen to uninstall the device driver.
4. Restart your computer if necessary.
4
Lenovo USB Port Replicator with Digital Video User Guide
®
warning message, click Yes to allow the CD to run active