Sonos Connect:amp Back - Sonos ZP120 Product Manual

4

SONOS CONNECT:AMP Back

Ethernet switch connectors (2)
Right speaker terminals
Left speaker terminals
Voltage select
AC power (mains) input
Analog audio in
Subwoofer output
Note: If you disconnect your subwoofer, make sure to
also disconnect the subwoofer's cable from the
CONNECT:AMP output.
Use Category 5 Ethernet cable to connect to a router, computer, or additional network
device such as a network-attached storage (NAS) device.
LED indicators:
•
Green (link connection)
•
Flashing Yellow (network activity)
Use high-quality speaker wire to connect the right speaker to the CONNECT:AMP.
Use high-quality speaker wire to connect the left speaker to the CONNECT:AMP.
115V/230V
Select the appropriate voltage setting for your country.
Use the supplied power cord to connect to power outlet.
You may use a standard RCA audio cable to connect the CONNECT:AMP's analog audio
inputs to the audio outputs from a separate audio component, such as a CD player or a
portable music player.
You may connect a powered subwoofer to this output using a standard RCA cable. The
system will detect when a cable is connected to the subwoofer output and adjust the
crossover frequency automatically.
Product Guide