Denon AVR 2308CI - AV Receiver Manual page 13

COMMAND PARAMETER
PHONO
Z2
|
IPOD
SOURCE
UP
DOWN
**
ON
OFF
?
Z2MU ON
OFF
?
FL UP
Z2CV
FL DOWN
FL **
FR UP
FR DOWN
FR **
?
Z2 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section)
Z2 COMMAND : Invalid at AVC-2308 for JAPAN
MULTI ZONE-2 mode set , and select source at AVR-2308
---The name of PARAMETER is
the same as that of the time of SI COMMAND.
MULTI ZONE-2 mode cancel at AVR-2308
MULTI ZONE-2 VOLUME UP/DOWN , direct change to **dB
at AVR-2308
**:10 to 99 by ASCII , 80=0dB, 99=---(MIN)
MULTI ZONE-2 ON/OFF change at AVR-2308
Return Z2 Status
ZONE2 OUTPUT MUTE ON/OFF change
Return Z2MU Status
ZONE2 CHANNEL VOLUME UP/DOWN , direct change to **dB
---FRONT Lch
**:38 to 62 by ASCII , 50=0dB
ZONE2 CHANNEL VOLUME UP/DOWN , direct change to **dB
---FRONT Rch
**:38 to 62 by ASCII , 50=0dB
Return Z2CV Status
function
- 13 -
example
Z2PHONO<CR>
|
Z2IPOD<CR>
Z2SOURCE<CR>
Z2UP<CR>
Z2DOWN<CR>
Z280<CR>
Z2ON<CR>
Z2OFF<CR>
Z2?<CR>
Z2MUON<CR>
Z2MUOFF<CR>
Z2MU?<CR>
Z2CVFL UP<CR>
Z2CVFL DOWN<CR>
Z2CVFL 50<CR>
Z2CVFR UP<CR>
Z2CVFR DOWN<CR>
Z2CVFR 50<CR>
Z2CV?<CR>