Lifter Set Up (Optional); Installing Lifter; If You Do Not Hear A Dial Tone - Plantronics Savi Office User Manual

5

Lifter Set Up (Optional)

5.1 Installing Lifter

Handset Lifter
Power Cord
1 Firmly press the handset lifter power cord into the
handset lifter jack.
2
While wearing your headset, slide the handset lifter arm
under the handset until the lifter base touches the side
of the phone.
3 Slide the lifter up to where it nearly touches the handset
earpiece.
4
Press the call control button on your headset to activate
the lifter.
5 If you hear a dial tone the lifter is set correctly and needs
no adjustment.
6
Remove the protective strips from the 3 mounting tapes
on the underside of the lifter.
Plantronics Savi User Guide
7 Gently place the lifter on the desk phone in the pre-
determined position.
8
Press firmly to adhere.

5.2 If You Do Not Hear a Dial tone

1
If you do not hear a dial tone, raise the lifter height
switch to the next highest position.
2 Repeat steps 2 through 5 in Section 5.1 as necessary
until you hear a dial tone.
3
When you hear a dial tone, secure the lifter as described
in steps 6 though 8.
10