Roxio Creator 2011 User Manual page 179

Note When tracks are added to your music library, they are left
in their original location; no copies are made.
The status of the scan is indicated by the progress bar, and by a
message that displays the number of new tracks that have been found.
If you need to stop the scan, click Stop and review results.
3 When the scan is complete, click Continue with track identification,
or select another location to scan and click Start Scan again.
Otherwise, track identification will begin automatically.
The track identification status is indicated by the progress bar, and by
a message that displays the number of tracks that have been identified,
are unrecognized, or have multiple matches.
4
When track identification is complete, choose one of the following
options:
■
Click Review Results to see the track information. If some tracks
had multiple matches, this is where you can select the best track
information. You can also manually update track identification, if
necessary.
■ Click Exit.
Note If you exit now, track identification will not be saved.
5
In the Audio Tag Editor, review the results of the scan. For information
about the options available in the Audio Tag Editor, click Help or press
F1, or see Editing audio tags with the Audio Tag Editor on page 144.
Finding tracks and managing track information
Creating music discs
179