HANNspree HF255HPB User Manual page 17

OSD TIME-OUT
OSD COLOR
SYSTEM
AUDIO INPUT
VOLUME
MUTE
DDC/CI
FACTORY RESET
INFORMATION
the OSD. Enter the option and adjust the level.
Select 「OSD TIME-OUT」option to set the OSD time out from
10 to 100 seconds. Enter the option and adjust the level.
To choose the color combination of the OSD window, select
「OSD COLOR」 option under 「OSD SETTING」 menu, choose
modes 1/2/3.
While transferring via the HDMI port, it is recommended to set
AUDIO INPUT to HDMI; if no sound is outputted, it is
recommended to select AUDIO INPUT as PC, and make sure the
PC audio output cable is connected to monitor's LINE IN (or
AUDIO IN) port. [For HDMI Input only]
Select the 「VOLUME」 option to change the volume level. Enter
the option and adjust the level.
models with incorporated audio.]
● By high volume, risk of hearing damage exists.
Select the 「MUTE」 option to switch the function On or Off.
availability of this function depends upon the selected model.
Adjusting the volume while muted cancels Mute mode.]
Select the 「DDC/CI」option to switch the function On or Off.
[Dual input mode optional]
Select the 「FACTORY RESET」option to reset to the monitor's
default setting. This will erase the current settings. Enter the
option and select On or Off.
Display Horizontal frequency/Vertical frequency/Resolution
information.
17
User's Manual
[This function applies only to
[The