Applications - Canon Speedlite Transmitter ST-E2 Instructions Manual

Applications

Even with a wireless multi-flash system, you can use high-speed sync
a s with camera-attached 650EX.
a
Wireless high-speed sync (FP
flash)
After setting t h e wireless single-
or multi-flash setup, just s e t t h e
speed sync. T h e slaves need not
be touched at all.
The ST-E2 can transmit wireless signals only toward the front. Therefore,
the slaves cannot be positioned behind the camera. Otherwise, they will
not be able to pick up the ST-E2's wireless control signals. However, with
Off-Camera Shoe Cord 2 (sold separately), the ST-E2 can be positioned
away from the camera and face any direction for wireless transmission.
Wireless F E lock
After setting t h e wireless single-
o r multi-flash s e t u p , j u s t p r e s s
t h e c a m e r a ' s < FEL
FE
enable wireless lock.
Flash exposure compensation
Flash exposure
can be set with the camera.
Wireless manual flash can be fired
by settlng the slave to single-slave
or manual flash
flash
Wireless r e p e a t i n g flash c a n be
used when the slave has been set to
For d e t a l l s , s e e t h e 5.50EXts