AllerAir 40 User Manual & Filter Change Directions

Safe Solder Fume Extractors Model 40
User manual & filter change directions
Unit set up
Unpack unit and inspect.
Plug the unit into a 115V 15AMP power supply
Turn the unit on with the switch on the side of the unit.
The unit is ready for use
Replacing or cleaning the pre-filter
Unplug the unit from the power
The first filter nearest the intake is a pre-filter
Simply lift pre-filter and remove. Insert new pre-filter and slide back into the unit.
Replacing the carbon filter
Unplug the unit from the power
Simply lift the carbon filterand remove. Insert new carbon filter and slide back into the unit.
Filter and fuse change diagram
Replacement parts
Pre-filter - S2FP0412
Carbon filter - S2SF0500
Unit wiring diagram
1 - 8 8 8 - 8 5 2 - 8 2 4 7
AllerAir Industries Inc
C a l l u s
IMPORTANT WARNING
!
Before opening unit for any reason UNPLUG
the cord set from the power supply
.
115V, 60 Hz
CARBON FILTER
CARBON FILTER
SWITCH
blk/brn
M
wht
green
w w w . a l l e r a i r . n e t
PREFILTER
MOTOR 115V, 0.4A
A lle rA ir_ MK : Ma nua ls /S a fe s olde r 40 Ma rc h 2007