Table of Contents
Advertisement
3. Center the garage door opener activation button over
the console door button, and press the opener firmly
into place.
The pegs inside the compartment door are used to
make sure the button on the compartment door will
contact the control button on the garage door opener.
4. Add one peg at a time
until the PUSH button
on the compartment
door operates the garage
door opener, with the
compartment door
closed, when you
press the button
marked PUSH.
5 . Now, with the
compartment door
closed, press the button
marked PUSH again
to make sure the
garage door opener
With the garage door opener positioned properly and
the right number of pegs in place, you should only
have to press the PUSH button slightly to operate
the opener.
6. Adjust the position of the garage door opener and
add or remove pegs, as needed, until the opener
operates properly.
Advertisement
Table of Contents
