Table of Contents
Advertisement
Loading the Batteries and SD Memory Card (optional)
This digital camera uses 4 AA batteries or optional CR-V3 x 2. The batteries and SD
card are located in separate compartments
the bottom of the digital camera, while the SD card compartment is located at the
back of the digital camera.
1.
Slide the battery cover in the
direction of the arrow, then lift to open.
2.
Load the batteries into the battery
compartment. (a)
3.
Close the battery cover.
4.
Flip the SD card compartment cover,
and insert the SD card into the slot. (b)
5.
Close the SD card cover.
CAUTION!
NOTE:
1. Upon loading new batteries, users will need to reset
2. Do not open the battery cover or remove the batteries
3. If you do not plan on using the digital camera for a long
.
The battery compartment is located at
(a)
1. Use only the specified battery or AC power adapter
(optional) (6.0V 2A) with this digital camera. Other power
sources may cause fire.
2.To improve battery performance, replace all
installed batteries at the same time and keep batter
way from heat.
3.To dispose off batteries, please refer to index of bat-
tery manufacturer.
4. Do not mix battery types or it may cause a fire or
explosion. Use only one battery type at one time
5. Batteries should be inserted in the battery compart-
ment with the "+" and "-" sides facing correctly.
6. For alternative power source, the optional AC
Adapter kit is available.
their Basic Settings
when the digital camera is in its ON status. Only remove
the batteries and SD card when the digital camera is not
in use, or in its OFF status.
period of time, please remove the batteries and SD card.
OK
SD Card Card
Battery Cover
(b)
6
Advertisement
Table of Contents
