Table of Contents
Advertisement
If you have created files on your Yakumo alphaX GPS since the last backup and do not
want to delete these files during the restore process, move the files from your Yakumo
alphaX GPS to your desktop computer or to a storage card before restoring data.
When you restore data, make sure that your Yakumo alphaX GPS has the same
regional settings that it had when you completed the backup.
1. Disconnect your Yakumo alphaX GPS from your desktop computer, if
connected.
2. Stop all running programs by tapping
Running Programs tab
icon
3. Insert the storage card if your data was backed up on the card.
4. Tap
Programs
5. Tap Restore and then Next .
6. Select the storage media containing your backup data and tap Next .
7. Select the items you want to restore.
8. Tap Restore .
9. Tap Yes . The program will start restoring data and then display a message on
the screen when restoring is completed.
10. Reset your Yakumo alphaX GPS as described in section 7.1.
76
Settings
Stop All .
Backup Restore icon to switch to the program.
System tab
Memory
Advertisement
Table of Contents
