Symbols - Homelite UT10532 Operator's Manual

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.
SYMBOL
Safety Alert
Read The Operator's Manual
Wear Eye, Hearing, and Head
Protection
SAFE-T-TIP Nose Guard
No Smoking
Operate With Two Hands
One Handed
Carbon Monoxide
Kickback
Bar Nose Contact
Wear Gloves
Gasoline and Oil
Keep Bystanders Away

SYMBOLS

NAME
Precautions that involve your safety.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Wear eye protection which is marked to comply with ANSI Z87.1
as well as hearing and head protection when operating this
equipment.
The SAFE-T-TIP nose guard on the guide bar helps prevent
kickback.
No smoking, sparks, or open flame.
Hold and operate the saw properly with both hands.
Do not operate the saw using only one hand.
Engines produce carbon monoxide which is an odorless, deadly
poison. Do not operate in an enclosed area.
DANGER! Beware of kickback.
Avoid bar nose contact.
Wear non-slip, heavy-duty protective gloves when handling the
chain saw.
Use unleaded gasoline intended for motor vehicle use with an
octane rating of 87 [(R + M)/2] or higher. This product is powered
by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle
oil.
Keep all bystanders and animals at least 50 ft. away.
DESIGNATION/EXPLANATION
Page 5