Chapter 4: Tutorial: Creating A Windows Installer Installation In Visual Studio Integrated Editor; About The Visual Studio Integrated Editor Tutorial; Open The C# Quickfacts Solution And Create An Installation Project - Symantec WISE INSTALLATION EXPRESS 7.0 SP2 - GETTING STARTED GUIDE V1.0 Getting Started Manual

Table of Contents

Advertisement

Chapter 4
Tutorial: Creating a Windows Installer
Installation in Visual Studio Integrated Editor

About the Visual Studio Integrated Editor tutorial

Open the C# QuickFacts Solution and Create an
Installation Project
Wise Installation Studio/Express Getting Started Guide
This chapter includes the following topics:
About the Visual Studio Integrated Editor tutorial

Open the C# QuickFacts Solution and Create an Installation Project

Open the Installation Project and Set Options
Enter Product Details and General Information
Add Files to the Installation
This tutorial is provided for users who plan to use the Visual Studio integrated editor to
synchronize installations with other projects in a Visual Studio solution.
First, follow the basic tutorial using the Wise editor.
See
About the basic tutorial
Then follow this tutorial using the Visual Studio integrated editor. This tutorial includes
only the procedures that have content that is specific to the Visual Studio integrated
editor.
Note
If you install Wise Installation Studio or Wise Installation Express before you install
Visual Studio, some of the files you need for this tutorial are not installed. To install
those files, perform a repair on the Wise Installation Studio or Wise Installation Express
installation.
This tutorial takes about 30 minutes to complete. If you must stop before finishing this
tutorial, save the installation and resume the tutorial at a later time.
In this tutorial, you will use Installation Expert in Windows Installer Editor to:
Open the C# QuickFacts Solution and Create an Installation Project
Open the Installation Project and Set Options
Enter Product Details and General Information
Add Files to the Installation
QuickFacts is a solution, written in C#, that consists of three projects:
FactFinder, which compiles to FactFinder.dll.
on page 16.
43

Advertisement

Table of Contents
loading

Table of Contents