Advertisement
Tables 5 and 6 list software features of the Cisco 880 Series.
Table 5.
Feature
IP and IP services features
ATM features (ADSL and G.SHDSL ATM
models only)
Switch features
Security features
QoS features
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Cisco IOS Software Features on Cisco 880 Series: Advanced Security Feature Set (Default)
Description
● Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)
● Generic routing encapsulation (GRE) and Multipoint GRE (MGRE)
● Cisco Express Forwarding
● Standard 802.1d Spanning Tree Protocol
● Layer 2 Tunneling Protocol (L2TP)
● Network Address Translation (NAT)
● Dynamic Host Configuration Protocol (DHCP) server, relay, and client
● Dynamic Domain Name System (DNS)
● DNS Proxy
● DNS Spoofing
● Access control lists (ACLs)
● ATM Variable Bit Rate real-time (VBR-rt)
● ATM Unspecified Bit Rate (UBR), Constant Bit Rate (CBR), and Variable Bit Rate non-realtime (VBR-
nrt)
● ATM operations, administration, and maintenance (OA&M) support for F5 Continuity Check; segment
and end-to-end loopback; and Integrated Local Management Interface (ILMI) support
● TX ring adjustment
● Virtual-circuit (VC) bundling
● Per-VC queuing
● Per-VC traffic shaping
● 20 ATM virtual circuits
● RFCs 1483 and 2684
● Point-to-Point Protocol over ATM (PPPoA)
● PPP over Ethernet (PPPoE)
● Auto Media Device In/Media Device Cross Over (MDI-MDX)
● Eight 802.1Q VLANs
● MAC filtering
● Two-port 802.3af and Cisco compliant PoE
● Switched Port Analyzer (SPAN)
● Storm Control
● Smartports
Secure connectivity:
● Secure Sockets Layer (SSL) VPN for secure remote access
● Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256
● Public-key-infrastructure (PKI) support
● 20 IPsec tunnels
● Cisco Easy VPN Client and Server
● NAT transparency
Zone-based policy firewall:
● Stateful inspection transparent firewall
● Advanced application inspection and control
● HTTPS, FTP, and Telnet authentication proxy
● Dynamic and static port security
● Low-Latency Queuing (LLQ)
● Weighted Fair Queuing (WFQ)
● Class-Based WFQ (CBWFQ)
● Class-Based Traffic Shaping (CBTS) (On Fast Ethernet WAN ports and DSL ports in Packet
Transport Mode [PTM] only)
● Class-Based Traffic Policing (CBTP)
● Policy-Based Routing (PBR)
● Class-Based QoS MIB
● Class of service (CoS)-to-differentiated services code point (DSCP) mapping
Data Sheet
Page 6 of 16
Advertisement
