TP-Link TL-WN723N User Manual page 22

network key is 0123456789. You can configure it for adapter as follows.
Step 1: Select the "WPA-PSK" as the Network Authentication.
Step 2: Select the "TKIP" as Data encryption.
Step 3: Enter the Network key and confirm it.
Step 4: Click the OK to save the configuration.
4. WAP2-PSK authentication
When you select the WPA2-PSK as the authentication, the available data encryptions are TKIP
and AES. Please select the one according your need.
Note:
The configuration for WPA2-PSK and WPA-PSK are similar, you can refer to WAP-PSK
authentication to configure it.
5. WPA 802.1x
When you select the WPA 802.1x as the authentication, the available data encryptions are TKIP
and AES. For the authentication, you should configure the 802.1x security. Select the EAP Type
and configure the corresponding options.
TL-WN723N 150Mbps Mini Wireless N USB Adapter
Figure 3-8
16