Linksys WVC54GCA-RM - Wireless-G Internet Home Monitoring Camera Network User Manual page 27

Chapter 5
NOTE: Before you can use the Camera's DDNS
feature, you must configure the port forwarding
feature on your network router. Go to
http://kb.linksys.com/16337 for instructions
on how to configure port forwarding on a
Linksys router. For other routers, refer to your
router's documentation.
NOTE: Once you have set up the DDNS feature,
a maximum of four users (i.e., users at four
different PCs) can simultaneously view the
Camera's video..
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screen's features, click Help.
UPnP
Enable/Disable When enabled, the Camera's Universal
Plug and Play (UPnP) feature allows a UPnP-enabled
computer to easily detect the Camera. The Camera's UPnP
feature is disabled by default. If your computer is UPnP-
enabled, select this option.
Alternate Access Web Port
Enable/Disable If you want the Camera to be able to use
an alternate port for communications, select this option.
Then, enter the desired port number in the range from
1024 to 65534 in the Port Number field. The default port
number is 1024.
If you already have a Web Server on your LAN, then you
should enable the Alternate Port and use this port number
instead of port 80.
RTP/RTSP
You can view a Camera's live video stream using various
multimedia player applications such as QuickTime,
RealPlayer, or Windows Media Player, or using a mobile
phone that supports RTSP. To do this, first configure the
RTP/RTSP settings in this section as needed, then open
the multimedia player, then point the player to the
appropriate URL listed below (where <Camera IP Address>
is the IP address of the Camera you want to view).
QuickTime or RealPlayer:
•
rtsp://< Camera IP Address>/img/video.sav
• Windows Media Player:
http://<Camera IP Address>/img/video.asf
• Mobile phone with RTSP support:
http://<Camera IP Address>/img/video.asf
Wireless-G Internet Home Monitoring Camera
Advanced Configuration with the Web-based Utility
RTSP Port
desired number in the range of 1024 to 65535. The
default is 554.
RTP Data Port
desired number in the range of 1024 to 65535.
Max RTP Data Packet
of RTP data packets, enter the desired maximum length in
the range of 400 to 1400.
Multicast RTP/RTSP
Enable/Disable
RTP/RTSP feature, or Disable to disable the feature.
Video Address
the new address in the field provided. The default Video
Address, 224.2.0.1, can be used for multicasting and does
not normally need to be reconfigured. If this address needs
to be changed, contact your network administrator.
Video Port
port number (even values only, from 1024 to 65534) in
the field provided. The default Video Port, 2240, can be
used for multicasting and does not normally need to be
reconfigured. If this port number needs to be changed,
contact your network administrator.
Audio Address
the new address in the field provided. The default Audio
Address 224.2.0.1, can be used for multicasting and does
not normally need to be reconfigured. If this address needs
to be changed, contact your network administrator.
Audio Port
port number (even values only, from 1024 to 65534) in
the field provided. The default Audio Port, 2242, can be
used for multicasting and does not normally need to be
reconfigured. If this port number needs to be changed,
contact your network administrator.
Time to Live
measured as the number of network routers that can
be passed before the data arrives at its destination or is
dropped) within which the data must reach its destination.
The value must be from 1 to 255. The default value is 16.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screen's features, click Help.
To change the RTSP Port number, enter the
To change the RTP Data Port, enter the
To change the maximum length
Select Enable to enable the Multicast
To change the Video Address, enter
To change the Video Port, enter the new
To change the Audio Address, enter
To change the Audio Port, enter the new
Enter the maximum length of time (usually
26