Setting the detecting mode
To set the detecting mode:
Click the option button of your desired mode. The following describes the available
configuration options:
•
Stay in the detecting mode until users press "Stop" - when a condition is
detected, VideoSecurity will continue detecting the region until you press the
Stop button on the main menu.
•
Leave the detecting mode whenever the number of conditions reaches
times - this option allows you to set the maximum number of conditions
before VideoSecurity stops detecting a region. To set
number in the text box or click the arrows to adjust the desired maximum
number.
•
Leave the detecting mode immediately - This is the default option. If any
unusual condition is detected, VideoSecurity Online stops watchdog function
immediately.
Setting the tracing method
To set the tracing method:
Click the Start tracing whenever a condition is detected check box to have
VideoSecurity Online not only detects conditions, but also can trace the motion
object. The tracing modes are:
ASUS Splendid HD graphics card
n
n
n
, key in your desired
41