Belkin F5U228 User Manual page 9

P74200ea_F5U228ea_uk 02-04-2003 16:16 Page 5
8. To confirm that the F5U228 has been properly installed, check the
Windows Device Manager:
a. Right-click on "My Computer".
b. Select "Properties".
c. Select the "Hardware" tab and click on the "Device Manager"
button.
d. Click the plus sign (+) next to "Imaging Devices".
You should now see an entry for "Hi-Speed USB 2.0
DVD Creator".
Note: The following steps assume that a composite video cable is being
used to connect your video source to the F5U228.
9. After hardware installation is finished, connect a composite video
cable between the F5U228 and to the video-out connector of your
source device.
10. Connect the stereo mini-plug of the supplied audio adapter cable to
the audio-out jack on your sound card. Then connect a stereo audio
cable between the audio adapter and the audio-input jacks of your
source device.
11. Hardware installation is now complete.
12. Click the "Install VideoStudio 6" button on the F5U228 installation
CD main menu, and follow the instructions provided by the installer.
13. Before capturing your first movie clip, it is recommended that you
either view or print the VideoStudio user guide. Select the
"VideoStudio User Guide" button located on the F5U228 installation
CD main menu. The manual is stored on your installation CD in PDF
format.
INSTALLATION
5
En