Installing The Digital Video Software - Canon 2689B001 - DC 330 Camcorder Instruction Manual

Installing the Digital Video Software

Be sure to install the Digital Video Software before connecting the
camcorder to the computer.
You must have authorization as a Computer System Administrator to install
programs.
Windows Vista/Windows XP Users:
Your digital video camcorder is equipped with the standard Picture Transfer
Protocol (PTP). This protocol enables you to download still images by simply
connecting the camcorder to a computer with the USB cable (applications such
as the [Scanner and Camera Wizard] start automatically).
However, note that there are several limitations to downloading still images
with this method. To avoid these, install ZoomBrowser EX to download still
images.
It may take a few minutes, after connecting the camcorder, until you can
download still images.
Still images protected on the camcorder may lose this setting once they are
downloaded to the computer.
1
Check that the camcorder is not connected to the computer.
While a camcorder is connected to the computer, the software cannot be
installed normally. If a camcorder is connected, detach the USB cable from the
computer.
2
Set the DIGITAL VIDEO Solution Disk in the computer's CD-
ROM drive.
• Windows Vista: When the [AutoPlay] window appears, click [Run
SETUP.EXE]. Follow the instructions in the [User Account Control] window
that appears after a brief period.
• Windows XP/Windows 2000: The installer panel appears automatically.
• If the installer panel does not open automatically, use the following procedures
to display it.
- Windows Vista:
1) Select [Computer] from the Start menu.
2) Right-click the CD-ROM icon and select [Open] from the displayed
3) Double-click the [setup.exe] icon.
4) Follow the instructions in the [User Account Control] window that
- Windows XP:
1) Select [My Computer] from the [start] menu.
2) Right-click the CD-ROM icon and select [Open] from the displayed
3) Double-click the [SETUP.EXE] icon.
- Windows 2000:
1) Double-click the [My Computer] icon.
2) Right-click the CD-ROM icon and select [Open] from the displayed
3) Double-click the [SETUP.EXE] icon.
20 Installing the Digital Video Software
menu.
appears.
menu.
menu.