Dixon Systems Table of Contents Table of Contents 1-1 Description 1-2 Features 1-3 Technical Description 1-4 Unpacking and Inspection 1-5 Mounting 1-6 Heat Dissipation 1-7 General 1-8 Set Up 1-9 Amplifier Specifications 1-10 Schematic Diagram 1-11 Notes Model RM-35...
L+R summing and with no change in volume. LEDs indicate Power and Stereo or Mono mode. **(The RM-35 is also available with the gain control mounted on the front panel when it’s not used with the NM-250.) The RM-35 can be used in newsrooms and editing suites or with modulation monitors and logging systems.
Heat generated by the amplifier is dissipated into the center compartment of the unit. The lid is vented and there should be some space between the RM-35 and whatever is mounted above it. With normal use, no other special considerations for cooling are necessary.
Dixon Systems 1-8 Set Up: The RM-35 can be set up in a few easy steps. Once the unit has been inspected, slide and secure the monitor into the rack. Connect the audio signals via XLR or quarter inch TRS connectors. Plug the unit into the AC mains. (The RM-35 operates from 110VAC - 60Hz power.)
Need help?
Do you have a question about the RM-35 and is the answer not in the manual?
Questions and answers