Page 2
CONGRATULATIONS for choosing a Bontrager bicycle helmet. This helmet is constructed to meet the highest standards for performance and safety. With correct adjustment, care and maintenance, this helmet will help you ride safely.
Page 3
Check the adjustment before every ride. To be effective, a helmet must Illustrations may not exactly match your helmet. Not all Bontrager helmets fit and be worn correctly. The helmet is designed to be retained by a strap include all the listed features.
Page 4
Adjusting the Helmet WARNING Bontrager offers several shell sizes to fi t different head sizes. To check the shell size of your helmet, put it on your head in the correct position (see Figure 1 and Helmets vary in both design and protection. This helmet is designed for Figure 2), but do not fasten the buckle.
Page 5
To Adjust the Left Nape Strap To Adjust the Chinstrap 1. With the helmet off, pull the left nape strap (Figure 4) through the back of the The helmet is designed to be retained by a strap under the lower jaw. The two helmet (Figure 5) to adjust the position of the left strap adjustor.
Page 6
To Remove the Helmet Cutting Excess Chinstrap While pulling lightly on the chinstrap, press on both of the recessed tabs of the If you choose to cut the chinstrap, leave at least 1 inch (25mm) above the buckle (Figure 11). buckle.
Page 7
To Adjust the Micro-Manager To Position the Micro-Manager 1. Put the helmet on your head, but do not connect the straps. 1. With the helmet off, identify the anchor and yoke of the Micro-Manager harness (Figure 15) and the circumference positions (Figure 16). 2.
Need help?
Do you have a question about the BICYCLE HELMET and is the answer not in the manual?
Questions and answers