Extension Antenna Boosters (SWAUB) to improve reception. Components This antenna divider will allow you to connect up to 4 Sabine SWM3000 UHF receivers (SWA4U) or 4 Sabine SWM1600 VHF receivers (SWA4V) to one set of antennas — thus alleviating the “porcupine effect” of multiple-receiver antenna placement — and im- proving reception as well.
Antenna Divider Installation Instructions Installation Connections 1. Using rack mount brackets supplied, install the Sabine Antenna Divider into an EIA standard cabinet (this step is optional). 2. Attach the two antennas supplied with your receiver to the A and B Antenna Input Connectors on the back of the Antenna Divider.
Antenna Divider Installation Instructions Installation Diagrams Power On/Off Switch with Power On LED indicator Antenna B Distribution Antenna A Distribution Sabine Output (to receivers) Output (to receivers) Antenna Rack Ears Rack Ears Antenna A Input Divider DC Power Input Jack,...
Refer servicing to qualified service personnel. Warning! To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The Sabine Antenna Divider is designed to operate from standard Attention! Cet appareil doit être relié à la terre.
FBX and FBX Feedback Exterminator are registered trademarks of Sabine, Inc., and are the brand names of its line of automatic feedback controllers. Covered by U.S. Patent No. 5,245,665, Australian Patent No. 653,736, Canadian Patent No. 2,066,624-2, German Patent No. 69118486.0, and U.K.