Axis 27981R1 User Manual page 89

Example:
Viewing
the Status file
Performing Resets
AXIS 5400+ / AXIS 5600+ User's Manual
> telnet npserver
Trying 192.36.253.96...
Connected to npserver.
Escape character is '^]'.
Axis Network Print Server TELNET Print Server v6.30 Dec 16 2000
Axis Network Print Server network login: root
Password: pass
Axis Network Print Server TELNET Print Server v6.30 Dec 16 2000
Root> account
Current account file:
JOB
1
2
3
4
5
6
Root>
Typical Telnet session to view the Account File
The status command shows which printer port the logical printers are
assigned to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name>
a UNIX shell.
2. Enter the user id and the password. (The default entries are
3. View the status file by typing:
status
Three types of reset commands allow you to perform soft resets, to
perform hard resets, and to reset the print server's parameters to its
default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name>
a UNIX shell.
2. Enter the user id and the password. (The default entries are
Management and Configuration
(not visible)
USER PROT LPR S BYTES
Thomas FTP pr2 C 1885
Joe LPT pr1 C 23074
RICHARD PSERVER pr2 C 43044
MacUser APPLE pr1 C 6717
LSLM_user NetBIOS pr2 C 36995
patrick PROS pr5 P 83208
or
telnet <IP address>
or
telnet <IP address>
ETIME OTIME
2 0
4 0
5 0
2 0
3 0
9 0
in a DOS window or in
and .)
root pass
in a DOS window or in
and .)
root pass
89