Nikon 9238 - Super Coolscan 5000 ED User Manual page 70

Remove the adapter cover
5
Position fi lm at either end of the adapter
6
If neither end of the fi lm is visible, rotate
the toothed wheel until one end pro-
trudes from the adapter.
Open the roller frame
7
Release the frame lock lever and open
the roller frame.
Opening the Roller Frame
Stop when resistance is felt. Attempting
to force the frame open past this point
could damage the adapter.
Remove the fi lm from the adapter
8
Remove the fi lm by pulling gently on the
visible end.
Reassemble the adapter
9
Close the roller frame, replace the adapter cover, and close the front panel.
Before reinserting fi lm in the SA-21, check that it is undamaged and free of dust and lint. If
the fi lm has been damaged and can not be scanned in the SA-21, scan the fi lm as described
"Scanning Long, Short, or Damaged Film."
Adapter cover
Toothed wheel
Roller frame
Frame lock lever
Roller frame
61