Related Manuals for Directed Video RVM560
Summary of Contents for Directed Video RVM560
-
Page 1: Lcd Video Monitor
O W N E R ’ S G U I D E INSTALLATION GUIDE LCD Video Monitor MODEL RVM560, RVM680, RVM700... -
Page 3: Table Of Contents
Table of Contents Warranty ..........4 Safety Instructions . -
Page 4: Limited Three-Year Warranty
Limited Three-Year Warranty For a period of THREE YEARS from the date of purchase, Directed Electronics, Inc. ("DIRECTED") promises to the original purchaser to repair or replace, free of cost, with a comparable reconditioned model any VIDEO MONITOR (hereafter the "UNIT"), which proves to be defective in workmanship or material defect under normal and reason- able use during the first 3 years after the purchase and installation of the unit provided the following conditions... -
Page 5: Safety Instructions
Safety Instructions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE INCLUDED HARDWARE. THIS MONITOR IS ONLY DESIGNED FOR REAR SEAT PASSENGER VIEWING AND IS NOT INTENDED FOR VIEWING BY THE DRIVER WHILE THE VEHICLE IS IN MOTION. -
Page 6: Proper Use
Features FEATURES Integrates with Directed Video’s Overhead Console System. RCA video inputs for system flexibility. Easy to use adjustment controls. Wireless remote control receiver built-in. -
Page 7: Basic Operation
Basic Operation MONITOR DESCRIPTION Screen - TFT active matrix LCD screen. Power/Source button - Press to turn the monitor on/off or change video source. Press to turn the monitor on. Press for more than three seconds to turn the monitor off. Press for less than three seconds when on to change the source. -
Page 8: On-Screen Menus
On-Screen Menus The Setup Menu is a list of programming selec- tions that control system operation and screen settings. Each selection has a list of settings that can be changed to optimize system operation. Some settings may have additional settings. Notes that include any specific programming instructions for these are included under the selection heading. -
Page 9: Setup Menu Descriptions And Operation
SETUP MENU DESCRIPTIONS AND OPERATION Following are explanations of the many settings that can be changed to customize the operation of your Rear Seat Entertainment system. To change the settings described, follow the directions in the on-screen menus section or the special instructions in each menu. SELECTION CHANNEL (TVM300 ONLY) DIMMER... -
Page 10: System Settings Menu
SECURITY (ESP/ESP2 ONLY) NOTE: This menu contains selections that have addi- tional settings. SETUP (MCB1000 ONLY) NOTE: This menu contains selections that have additional settings. This menu is used for initial system setup only. IMPORTANT! Any changes in the following menus must be written into the MCB1000 and ESP/ESP2 software. -
Page 11: Hardware Options Menu
WRITE TO SYSTEM HARDWARE OPTIONS MENU SELECTION POWER AUTO OFF FM MODULATOR ANTENNA TV CATV STD WRITE TO SYSTEM © 2001 Directed Electronics, Inc. Highlight WRITE TO SYSTEM, press the monitor’s MODE button or the remotes MENU button to enter the system changes. WRITING TO SYSTEM will be displayed. -
Page 12: Assign Source Names Menu
ASSIGN SOURCE NAMES MENU NOTE: In this menu use the monitor’s MODE button or the remote’s MENU button to toggle through the available choices for source names. SELECTION SOURCE 1: AV1 SOURCE 2: AV2 SOURCE 3: AV3 WRITE TO SYSTEM ASSIGN TRIGGER NAMES MENU NOTE: In this menu use the monitor’s MODE button or the remote’s MENU button to toggle through the available choices for zone names. -
Page 13: Source Names
ZONE 8 WRITE TO SYSTEM SOURCE NAMES SOURCE X: VCR SOURCE X: DVD SOURCE X: GAME SOURCE X: CAMERA SOURCE X: REAR CAMERA SOURCE X: AUX INPUT PANEL © 2001 Directed Electronics, Inc. Select to change the name of zone 8 from the zone names list at the end of this section. -
Page 14: Installation
Installation MONITOR SPECIFICATIONS RVM 560 Screen size 5.6" Resolution 74,880 pixels View angle Top 10 degrees Bottom 30 degrees Left 45 degrees Right 45 degrees Video system ntsc/pal Osd language English Power requirements 10 - 15 vdc Operating temp. 35 - 115 degrees fahrenheit RVM 680 Screen size... - Page 15 Monitor Connector Monitor Mounts © 2001 Directed Electronics, Inc.
- Page 16 The company behind this system is Directed Electronics, Inc. Since its inception, Directed has had one purpose, to provide consumers with the finest vehicle security, car stereo products, rear seat entertainment, and accessories available. The recipient of more than 20 patents in the field of advanced electronic technology, Directed is ISO 9001 registered.
Need help?
Do you have a question about the RVM560 and is the answer not in the manual?
Questions and answers