Advertisement
Quick Links
Advertisement
Summary of Contents for Briteq LD-SPLIT IP68 - INSTALLATION V1.0
- Page 1 ENGLISH Installation Manual Version: 1.0...
- Page 2 Specification Junction box for outdoor applications IP 68 Dimension: 129 x 91 x 40 mm Weight: 0.15kg Installation The LD-SPLIT IP68 should be placed on a non-flammable flat surface in any orientation and fixed by the two screws. There are two mounting holes in the housing.
- Page 3 1. Unscrew all the screws (A), open the right cover (B) and remove the gasket (C). 2. Connect wires to the PCB board (D) through the water-proof input glands (E) as shown below. 3. Install the gasket (C) and the cover (B) back firmly.
- Page 4 Brown Brown White + Brown White + Brown Green Green White + Green White + Green Blue Blue White + Blue White + Blue Orange Orange White + Orange White + Orange Out or Led Fixture Brown Brown White + Brown White + Brown Green Green...