Table of Contents
Advertisement
•
Hood Trigger - Opening the hood will sound the siren, flash the lights for the programmed duration, and
report Zone 1.
•
Trunk Trigger - Opening the trunk (if connected) will instantly sound the siren and flash the lights for the pro-
grammed duration and report Zone 4.
•
Ignition Trigger - If the ignition is turned on the siren will chirp for three seconds, then the siren will sound and
the lights will flash for the programmed duration and report Zone 5.
When a Triggered Response is activated the transceiver will:
•
Repeat four quick beeps (or vibrate) for 15 seconds.
•
The full trigger alert icon (28) will turn on for 15 seconds.
➤ Setting the clock
�������
To set the clock press and hold
start flashing. Immediately press
Once the correct hour is displayed press
advance the minute selection or
stop pressing all buttons for 15 seconds and the transceiver will automatically exit the clock mode.
➤ Temperature check mode
This system will report the interior temperature of your vehicle with the press of three buttons. To activate the tem-
perature display press
temperature will appear on the LCD screen for five seconds.
�������
�������
➤ 24-hour timer mode
To enter 24 hour timer mode, press
the clock indicator will appear on the remote's LCD. Once in Timer Mode, the system will remote start every 24
hours. Repeat this procedure to turn 24 hour Timer Mode off.
12
for five seconds, the transceiver will chirp twice and the hour selection will
to advance the hour selection or
�������
�������
again and the minute selection will start flashing. Then press
to reverse the minute selection. Once the correct time is displayed simply
,
and
simultaneously and then release. You will hear a melody and the interior
Note: If the ignition is on, the temperature check will
not work.
and
�������
simultaneously. The 2-way remote will produce a melody and
to reverse the hour selection.
© 2008 Directed Electronics. All rights reserved.
to
�������
Advertisement
Table of Contents
