Saving Parameters - NOVAK PIT WIZARD Instruction Manual

SAVING PARAMETERS

Profiles that are created or uploaded can be saved into any of ten
(10) memory locations in the Pit Wizard by following these steps.
You can also keep a written record of the Profiles you make on the
Profile pages provided at the back of this manual.
Note: The new Profile will be stored in place of the previous Profile
that occupied the chosen memory location in the Pit Wizard.
1. Upload parameters from Cyclone or use the Edit Profile mode to
create a Profile to save, and return to the main menu.
2. Press the {MODE} button until you reach the Save Profile main
menu mode:
3. Press the {ENTER} button once to display the current memory
location number:
4. Press the {UP} or {DOWN} buttons to select the desired memory
location (0-9) that you want to store the Profile in.
5. Press the {ENTER} button to save the Profile. The display will
indicate that the Save procedure was successful:
6. Press the {MODE} button to exit back out to the main menu.
You will advance to the next main menu option:
PIT WIZARD INSTRUCTION MANUAL
5 Save Profile
5 Save Profile
3
5 Save Profile
Profile Saved
6 Monitor Trig
23