Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Directed Audio s550
Summary of Contents for Directed Audio s550
- Page 1 s650...
-
Page 2: Table Of Contents
CONGRATULATIONS Congratulations for choosing a Directed Studio neodymium component speaker system from Directed Electronics. Directed Electronics has been the industry leader in high-quality automo- tive security and audio equipment since 1990, and with the introduction of the Directed Studio line of high-quality loud-... -
Page 3: Limited Two-Year Consumer Warranty
LIMITED TWO-YEAR CONSUMER WARRANTY Directed Electronics, Inc. (DEI) promises to the original purchaser, to replace this product should it prove to be defective in workmanship or material under normal use, for a period of two years from the date of... -
Page 4: Features
Mylar capacitors in all series pass positions. Glass epoxy PCB for better system power handling. Applications s550 fits standard 5.25” domestic and 130mm European applications. s550 also supplied with adapter plated for 5x7/6x8 mounting. s650 fits 6.5S domestic and 170mm European applications. -
Page 5: Sound Quality
Speaker location, orientation, phasing, and the vehicles interior mate- rials are important considerations when INSTALLATION PRECAUTIONS The Directed s550/s650 neodymium separates are designed for installation into factory speaker locations, custom mounting enclosures or any flat mounting surface inside the vehicle with sufficient rear clearance. -
Page 6: Woofer Installation
2. Draw the speaker hole and mounting screw locations on the panel with a marker. The s550 woofer requires a 4-3/4" to 5” hole The s650 woofer requires a 5-1/2" hole. 3. Remove the cutout template and carefully cut the speaker hole to the proper size. -
Page 7: Tweeter Installation
FIGURE 2—FLUSH MOUNTING REMOVED PANELS © 2003 Directed Electronics, Inc ring as a template to mark the proper size hole. Cut out the hole. 5. With the tweeter assembled, route... - Page 8 (Make sure the arrow at the rear of the tweeter housing is pointing in the desired direction.) 9. Insert the tweeter into the housing and attach trim ring. (Refer to the trim ring information at the end of this section.) © 2003 Directed Electronics, Inc...
- Page 9 3/8" drill bit, insert a grommet and route the speaker wire from the crossover through the grommet. FIGURE 4—TWEETER SURFACE MOUNTING © 2003 Directed Electronics, Inc 5. After removing the surface mount tweeter assembly trim ring, route the tweeter wires through the larger...
-
Page 10: Crossover Installation
© 2003 Directed Electronics, Inc... -
Page 11: Specifications
Voice coil former Voice coil diameter Voice coil layers T T w w e e e e t t e e r r : : Efficiency (1W/1M) Crossover © 2003 Directed Electronics, Inc s550 s650 45Hz-21kHz 40Hz-21kHz 3.764 3.435 52.82 g 5282 g 3.25L... - Page 12 Quality Directed products are sold and serviced throughout North America and around the world Call 800 274 0200 for more information about our products and services © 2003 Directed Electronics, Inc. - All rights reserved - G33550/33650 03/03 The company behind this system is Directed Electronics, Inc.
Need help?
Do you have a question about the s550 and is the answer not in the manual?
Questions and answers