Converting Parts Of A Page In A Multipage Document - Visioneer PROOCR100 User Manual

Tips for Getting the Best Results

Converting Parts of a Page in a Multipage Document

Creating the Deferred Job
file:///C|/VisioneerDoc/html/08tips.htm (6 of 13) [1/20/2003 4:21:24 PM]
5. To scan the page again with a different brightness setting, delete the page.
6. Increase or decrease the brightness.
If the page image contained dark or touching characters, increase brightness.
If the page image contained light or broken characters, decrease brightness.
If the page image has a "noisy" (fuzzy, dotty) background (as in some multi-
generation photocopies and some faxes), increase brightness in order to
"fade out" the background "noise."
7. Repeat steps 2 through 6 until you get the image that you want for that page.
After you find the correct setting for one page, you can use this setting for
other pages in your document that are of similar quality.
8. Choose Finish Processing from the Process menu.
Make sure you set the appropriate Locate and Recognize options.
OR
Save the document in the Pro OCR Deferred format.
If you save in the Pro OCR Deferred format, you can choose Process
Deferred Jobs at a later time.
NOTE: When you use Get Page after deleting a page, the new page is inserted after
the current page. If you delete a page and it is not the last page of the document,
make sure you go to the page preceding the deleted page before you get the page
again.
This procedure shows how to process each page separately at the Locate step, but
you can use the same Get Page and Recognize options for the entire document.
To process a document when you want different information from each page: