Verification Setup; Hard Drive Mode Setup - JOBO GIGA ONE SONIC Manual

12

6.2. Verification Setup

Select Setup->Verify:
Full Verification
After all files have been copied, the file on the GIGA ONE SONIC hard drive is compared bit
by bit with the same file
on the memory card to ensure that the data is identical and successfully transferred. This is
the slowest but most accurate verification process.
Quick verification:
This is the fastest verification process as it only verifies 1 out of every 32 sectors of data.
Random verification:
This process will carry out full verification on one out of several (3 or 7 or 16) files. By default,
it will verify 1 out of every 7 files.

6.3. Hard Drive Mode Setup

Select Setup->System->LBAMode
48Bits LBA(Logical Block Address):
Select this for large hard drive (over 128GB) support. Do not use
this mode for smaller hard drives (128GB & below) as they may
perform slower and have compatibility issues.
28Bits LBA:
Select this for smaller hard drive (l28GB & below) support.