Configure Passwords; Finish Installation - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - GETTING STARTED WITH STRM LOG MANAGEMENT APPLIANCES REV 1 Getting Started
Getting started with strm log management appliances
Hide thumbs
Also See for SECURITY THREAT RESPONSE MANAGER 2008.2 - GETTING STARTED WITH STRM LOG MANAGEMENT APPLIANCES REV 1:
- Administration manual (370 pages) ,
- Manual (228 pages) ,
- Getting started (14 pages)
Table of Contents
Advertisement
Configure STRM Log Management
15
15
Settings
Using the up/down arrow keys to navigate the
fields, update the following parameters:
Hostname - Domain name as hostname.
•
IP Address - IP address of the appliance.
•
Netmask - Network mask address.
•
Gateway - Default gateway.
•
Primary DNS - Primary DNS server.
•
Secondary DNS* - Secondary DNS server.
•
Public IP* - Public IP address of the server.
•
EMail Server - E-mail server. If you do not
•
have an e-mail server, enter localhost.
* All fields are mandatory with the exception of
the Secondary DNS and Public IP.
Press Tab and then use the left/right arrow keys,
select Next. Press Enter. The New Root
Password window appears.
Configure Passwords
16
16
Enter your root password. Use the TAB key to
a
navigate to the Next option. Press Enter. The
Confirm Password window appears.
Re-enter your password to confirm. Use the
b
TAB key to navigate to the Finish option and
press Enter. When STRM Log Management
completes the installation process, the
Configuration is Complete window appears.
Finish Installation
17
17
Press Enter to select OK. Type exit and press
Enter.
6
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - GETTING STARTED WITH STRM LOG MANAGEMENT APPLIANCES REV 1
Related Products for Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - GETTING STARTED WITH STRM LOG MANAGEMENT APPLIANCES REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1
- Juniper STRM LOG MANAGEMENT 2008.2 - S 6-2008
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper MEDIA FLOW CONTROLLER 2.0.5
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper 200 Series
Need help?
Do you have a question about the SECURITY THREAT RESPONSE MANAGER 2008.2 - GETTING STARTED WITH STRM LOG MANAGEMENT APPLIANCES REV 1 and is the answer not in the manual?
Questions and answers