Imperial RG3061 How-To

How to replace
When installing new floors,
new flooring and home decor.
Step-by-step
1. Determine the size of the register.
Remove the original vent cover to expose the
ventilation opening.
of the opening. Subtract
how square the opening
dimensions for the new floor reglsters.
register until you get the new ones.
2 Select an Imperial
Imperial Registers are designed
openings used in most homes. A wide variety of
designs and finiShes are available.
Unpack and Install.
3
Imperial Registers come fully assembled.
drop into place.
Floor
Measure the opening...
an existing
many overlook replacing
Fortunately; this
Measure the length and width
1/8" to If4"Cdepending
is) and this is the inside
Reinstall
Register.
to fit the standard
Simply
Wall
NOT the register!
register or grille
existing floor registers
is something anyone
To replace
Replacing
floor register
1. After the initial size check, make sure that there is
on
sufficient
the wall registerto
old
wall with screws that are provided
register.
Final installation
2.
the wall registerto
screws provided
with ones that complement
can do themselves.
a ceiling register
a ceiling register is just
except for a couple
wall or ceiling space at the short ends of
allow for you to attach it to the
requires a screwdriver
the wall or ceiling with the
Ceiling
their
like that of the
of steps:
with your new
to attach