The Beeper Codes - Linksys EFG250 - EtherFast NAS Server User Manual

EtherFast Network Attached Storage (250GB with PrintServer)

The Beeper Codes

The Network Attached Storage has an internal beeper that beeps to indicate certain events.
1 Beep This signals that the Reset button or power button has been pressed.
2 Beeps When this is repeated every five seconds for one minute, it signals that the Network Attached
Storage is configured as a DHCP client, but no DHCP server has responded to the DHCP client's
request for an IP address.
3 Beeps When this is repeated every 15 seconds for three minutes, it signals that the Network Attached
Storage's hard drive usage exceeds 98% of total capacity.
5 Beeps When this is repeated every 15 seconds for three minutes, it signals that the Network Attached
Storage is overheating. The Network Attached Storage will automatically shut down three
minutes after the first beep.
Chapter 2: Getting to Know the Network Attached Storage
The Beeper Codes
6