Juniper JUNOSE FOR E SERIES BROADBAND SERVICES ROUTERS - RELEASE NOTES 11.1.1 Release Note page 85

Table 4: Routing Protocol MaximumsTable continued on next page
Feature
OSPF adjacencies
OSPF routes
IPv6 routing table entries
(See Note 3 on page 75.)
J-Flow statistics
J-Flow–enabled VRs and VRFs, in any combination
Sampled interfaces per VR or VRF
Total sampled Interfaces per chassis
Martini circuits for layer 2 services over MPLS
Total Martini circuits per line module
(See Note 6 on page 75.)
Total Martini circuits per chassis
(See Note 7 on page 75.)
External Martini circuits per chassis
Internal Martini circuits (local cross-connects) per chassis
Multicast routes (IPv4 and IPv6)
Forwarding entries [(S,G) pairs] per chassis
(See Note 8 on page 75.)
Outgoing interfaces per chassis
(See Note 9 on page 75.)
Network Address Translation (NAT)
Static translations (simple or extended) per chassis
Dynamic simple translations (NAT) per SM
(See Notes 10 and 11 on page 76.)
Dynamic extended translations (NAPT) per SM
(See Notes 10 and 11 on page 76.)
Response Time Reporter simultaneous operations
per VR
VRRP VRIDs per line module ASIC
Copyright © 2010, Juniper Networks, Inc.
ERX705 and
ERX310 ERX710
1000 1000
25,000 25,000
50,000 50,000
16 16
32 32
512 512
8000 8000
16,000 16,000
16,000 16,000
16,000 16,000
16,384 16,384
65,536 65,536
96,000 96,000
400,000 400,000
200,000 200,000
500 500
See Ethernet VRRP VRIDs per line module ASIC
ERX310, ERX7xx, and ERX14xx System Maximums
Appendix A: System Maximums
ERX1410 ERX1440
1000 1000
25,000 25,000
50,000 50,000
16 16
32 32
512 512
8000 8000
16,000 32,767
16,000 32,767
16,000 32,767
16,384 16,384
65,536 65,536
96,000 96,000
400,000 400,000
200,000 200,000
500 500
on page 72
.
77