Tanita SYNCWALK Instruction Manual

Introduction
Thank you for purchasing this product.
Before using SyncWalk, please read this
manual carefully and keep it for future
reference.
Features
• Helps you keep a consistent pace while
you walk
• Pitch Sound can be turned on/off with the
touch of a button
• Pitch can be adjusted from 50 to 250 beats
per minute
• Includes stopwatch and clock function
• Lightweight and compact with handy neck strap
Components/Functions
Front (Display)
TIME
1
DOWN
2
3
4
1. LCD Display
2. Down Button
3. Up Button
LCD Display Screen
7
7. Time Indicator
8. Pitch Indicator
Back
11
12
Min
11. Battery Cover
12. Minute Button
PITCH STOPW.
UP MODE
4. Start/Stop Button
5. Mode Button
6. Neck Strap
8 9
10
9. Stopwatch Indicator
10. Footstep Symbols
+
Hour
13. Protective Tab
14. Hour Button
Using SyncWalk
Pull-out the protective tab from the battery cover.
Use the Mode button to toggle between Time, Pitch,
and Stopwatch features.
Note: At first use (or after replacing the batteries), the
Time feature will show the clock at 12:00 and will
need to be reset to the correct time.
Setting the Clock
TIME PITCH STOPW.
Min
3. Follow the same procedure using the Minute button.
Press the Minute button to find the correct numbers.
5
When the correct number appears release the
Minute button.
Setting the Pitch
TIME
6
Note: The Footstep Symbols will flash alternately on the
left and right side of the display and the Pitch
Sound will turn on automatically. To turn off (or on)
the sound, press the Start/Stop button.
TIME TIME
DOWN
Note: The Pitch Sound and the Footstep Symbols work
only when the Pitch feature is selected. (The tone
will not sound and the marks will not be visible while
using the stopwatch or clock setting.)
Note: Use caution when looking at the display while moving.
Stopwatch
Minute
13
TIME
Counter
14
2. Use the Start/Stop button to start, stop, and reset
the Stopwatch. The stopwatch counts up to 99
minutes 59 seconds (if this time is exceeded the
stopwatch will begin recounting from 0).
Note: The Minute Counter and Second Counter are only
visible when the Stopwatch feature is indicated.
Note: The stopwatch will continue to operate even if
you switch to the Time or Pitch setting.
1. Press the Mode button
until the Time feature
is indicated on the
display.
2. On the back of the
unit, use a tool with a
pointed tip (such as a
pen) to press the Hour
button (or press and
Hour
hold for a quick scroll
through the numbers)
to find the correct
hour. When the correct
hour appears, release
the Hour button.
PITCH STOPW.
1. Press the Mode
button until the Pitch
feature is indicated.
2. Adjust the Pitch by
PITCH STOPW. PITCH STOPW.
using the Up and
Down buttons—press
and hold a button for
UP MODE
a quick scroll through
the numbers. The Pitch
can be adjusted from
50 to 250 beats per
minute.
Second
1. Press the Mode button
PITCH STOPW.
Counter
to switch the indicator
to the Stopwatch
feature.