Advertisement
tnstallation
How
to connect
Connect
the audio
and video cables
from the e×ternaJ equip-
ment's output
jacks
to the TV input jacks,
as shown
in the
figure.
When
connecting
the TV to external
equipment,
mutch the
jack colors
(Video = yellow, Audio
Left = whffe,
and Audio
Right = red).
How
to use
1. Select
the input source
with using the TW_.,/IDEO button
on
the remote
contro4. Note that this TV finds the connected
input sources
automaticafly
for Video,
Front Video and
Component
1-2
it is presumed
that RGB and HDMIiDVI
sources
are connected.
2. Operate
the corresponding
external
equipment.
Camcorder
Video Game
Device
DVD
How
to connect
1. Connect
the DVD video outputs
(Y, PB, PR) to the COMPONENT
(Y, P& PR) iNPUT
jacks
on the TV and connect
the DVD
audio
outputs
to the AUDIO
INPUT jacks
on the TV, as shown
in the figure
2. If your DVD on_y has an S-Video
output
jack, connect
this to the SWIDEO
input on the TV and connect
the DVD audio outputs
to the AUDIO
INPUT jacks
on the TV, as shown
in the figure.
Note: If your
DVD player
does not have component
video output,
use SoVideo.
How
to u_
1_ "rum on the DVD player, insert
a DVD
2. Use the _iVIOEO
button
on the remote
control
to seUect Component
1 or Component
2
(If connected
to S-VIDEO,
select
the Video
or Front Video
external
input source,)
3 Refer to the DVD ptayer's
manuat
for operating
instructions,
" Component
input
ports
To get better
picture quality,
conn_
a DVD pUayer to the com_-
nent
input ports as shown
below:
Component
ports
on the TV
Video output
ports
on DVD player
Operating
Guide
15
Advertisement
