D-Link DSB-650TX Installation Manual page 2

Installing the DSB-650TX
§ Plug the "A" connector of the
USB cable provided into an
available USB slot on your
computer. This is the narrow
end of the cable.
§ Plug the "B" connector of the
USB cable into the
DSB-650TX. This is the larger
end of the cable.
§ Connect one end of a
straight-through Ethernet
cable to the RJ-45 port of the
DSB-650TX.
§ Connect the other end of the
Ethernet cable to a switch or
broadband modem.
§ Windows will detect the
DSB-650TX and ask you for
the drivers. Refer to the
following section below that
corresponds to your operating system.
Type B
2
- -
Type A
RJ45
RJ45